AC Engineering pays attention not only to the certifications of its construction system, but also to the achievement of excellence in its business worldwide; indeed, in 2017 it obtained the UNI EN ISO 9001:2015 certification dispensed by TÜV Italia.
European Technical Evaluation VTE
Article #26 EU Regulation No. 305/2011 is preparatory to the issue of CE Marking for Home Done structural panels in high density reinforced EPS for housing units in kit – ITC CNR Institute for Construction Technology, National Research Council;
Technical evaluation of the performance and fulfillment of the requirements of the Home Done Building System – GAI Laboratories, Certification Testing lnspection
In accordance with the testing procedures approved by ICC-ES – International Council Code for Evaluation Service, following the technical regulations on structural and thermal properties:
- 2015 International Building Code
- 2015 International Residential Code
- 2014 Florida Building Code – Building, excluding HVHZ provisions
- 2013 California Building Code, excluding CBC Chapter 7A
- 2013 California Residential Code, excluding Section 327
- EPA Seal & Insulated with ENERGYSTAR
Test report No. 39120/32
Study related to the structural response of polystyrene and steel panels named Home Done – Department of Civil Engineering and Architecture, University of Pavia;
Test report No. 333758
Fire behavior of vertical non-load bearing element according to UNI EN 1363-1:2012 and UNI EN 1353-1:2015;
Life Cycle Assessment of the Home Done building system
Produced by AC Engineering – Ms. Adriana S. Sferra, Professor Architect, Department of Planning, Design, Technology of Architecture, University of Rome – “La Sapienza”;
Test Report No. RJ5337-1
Home Done Wall Panels with two grids and with four grids: Performance Testing in accordance with Sections 9, 11 and 14 of ASTM E 72-15, Standard Test Methods of Conducting Strength Tests of Panels for Building Construction – QAI Laboratories, Certification Testing Inspection;
Test report No. 39633/165
Study concerning the structural response of polystyrene and steel panels called Home Done – Department of Civil Engineering and Architecture, University of Pavia;
REPORT 1.2017/HOME DONE
Results of the experimental activities related to freeze-thaw cycles (UNI EN 13687-4:2003) and wetting cycles – UV (UNI EN ISO 16474-3:2014) on Home Done panels – Department of Civil Engineering, Building and Architecture, Polytechnic University of Le Marche.
REPORT 2.2017/HOME DONE
Results of the thermo-energetic and hygrometric analyses and of the experimental activities for the determination of the transmittance in situ (UNI EN ISO) and of the air tightness (UNI EN ISO 9972:2015) on building systems and components Home Done – Department of Civil Engineering, Building and Architecture, Polytechnic University of Le Marche.